Experts suggest that when purchasing wooden furniture, consumers understand and master the technical requirements of wooden furniture and distinguish their advantages and disadvantages, which is an effective way to correctly purchase wooden furniture. Emphasis on surface quality Wood-based furniture in wood furniture is based on wood-based boards such as particleboard and medium-density fiberboard. The surface is decorated with melamine, PVC, wood veneer, and paper wood grain. The wood-like pattern is clear and natural. , Smooth and flat, with good visual effects and feel. When buying furniture, the main thing to see is whether the surface of the furniture material has scratches, indentations, blisters, peeling peeling and glue marks. Pay attention to the quality of production In the production of wooden furniture, the formed boards are cut and sawed, decorative edge banding, and parts are assembled. When looking at the quality of wood-based panel furniture, we mainly look at the quality of its cutting saws, the quality of edge and surface decoration, and the quality of panel ports. Generally speaking, the boards that meet the precision requirements have a flat profile and a good angle after cutting. After the furniture is made, the plate will not tilt. The side and surface decoration mainly depends on whether the decorative parts are evenly glued, whether the bonding is firm, the trimming is smooth and smooth, and whether the side faces of the visible parts such as the side panels, door panels, drawer panels, etc. are edge-sealed and decorated. No trace of adhesion can be found on the edges of the fine board. The assembling combination mainly depends on whether the grooves at the drilled holes are delicate and neat, whether the connectors are firmly installed, whether there is a gap in the T-shaped seam after the plane is connected to the end face, and whether there is looseness when pushed by hand. Pay attention to the quality of metal and plastic parts In wooden furniture, metal and plastic parts are often used as fastening connections, so the quality of metal parts also determines the internal quality of wooden furniture. Metal parts are required to be smart, smooth, and the surface is plated well. There must be no rust, burrs, etc., and the precision of the matching parts must be high. Plastic parts must be beautiful in appearance and colorful, and the strength and elasticity of the parts in use must not be too thin. The open-type connecting piece requires flexible rotation, and the spring inside is to be properly tightened, so that the furniture will be smooth, easy and frictionless when opened.